Air Conditioning thats easy to install and extremely quiet
Air conditioning systems are provided with a high drain up pump with increased lift of 750mm.

The indoor units use an aerodynamically designed diffuser turbo fan. Quiet operation is achieved through the unified structure of 3 dimensional blades and air diffuser, which determines the flow of air within the unit.
Keep the air under control, and the noise is reduced!
Multi flow system:
Air flow rates and directions can be selected to suit varying room shapes with 2, 3 or 4 way blow air distribution.

use of branches
For 2 way or 3 way blow installation, the sealing component on the air discharge outlet (optional) must be used to close off the unused outlet(s).
Comfortable air flow:
Auto swing:
Vertical auto swing automatically moves the flaps up and down
to distribute air effectively throughout the whole room.

Draught prevention: Auto swing between 10deg and 40 deg

Standard setting: Auto swing between 10deg and 65 deg

Ceiling soil prevention: Auto swing between 30deg and 65 deg
5 different air flow patterns:
Any one of five different air flow patterns can be freely selected between 0deg and 65deg. This air flow pattern will then be maintained during the operation of the air conditioner.

Draught prevention: Up to 5 different patterns can be set between 10deg and 40 deg

Standard setting: Up to 5 different patterns can be set between 10deg and 65 deg

Ceiling soil prevention: Up to 5 different patterns can be set between 30deg and 65 deg
Draught prevention (heating models):
Prevents draughts by automatically changing to a horizontal air flow discharge
when the heater is started up and the air conditioners thermostat is switched
off.

Draught prevention: Automatically set to 10deg

Ceiling soil prevention: Automatically et to 30deg
Auto blow air flow control:
The last airflow pattern is memorised and automatically reset the next time the
air conditioning unit is turned ON.

Draught prevention: Initial setting is 30 deg for cooling and 65deg for heating
Overview 
